Описание оборудования | |
---|---|
Safety Monitor, 16 decentralized output circuits | |
General specifications | |
AS-Interface specification | V3.0 |
PLC-Functionality | none |
Duplicate address detection | from AS-Interface slaves |
Earth fault detection | integrated |
EMC monitoring | integrated |
Diagnostics function | Extended function via display |
Switch-on delay | < 10 s |
Response delay | < 40 ms |
UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source |
Functional safety related parameters | |
Safety Integrity Level (SIL) | SIL 3 |
Performance level (PL) | PL e |
MTTFd | 200 a |
B10d | 2 E+7 |
Indicators/operating means | |
Display | Illuminated graphical LC display for addressing and error messages |
LED FAULT | Error display; red LED red: Communication error red flashing: release circuit error |
LED POWER | voltage ON; LED green |
LED U AS-i 1 / U AS-i 2 | AS-Interface voltage - circuit 1/circuit 2; green LED |
LED ready | off: - constantly lit: startup/restart lock active flashing: external test required |
LED AUX | ext. auxiliary voltage UAUX ; LED green |
LED EDM/Start | External device monitoring circuit inputs closed, 4x yellow LEDs |
LED output circuit | Output circuit closed; 4 x green LEDs |
Button | 4 |
Electrical specifications | |
Insulation voltage | ? 500 V |
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface; 24VDC |
Rated operating current | ? 200 mA from 24VDC ? 45mA from AS-Interface |
Interface | |
Interface type | RS 232, serial |
Transfer rate | 19.6 kbaud, no parity, 1 start bit, 1 stop bit, 8 data bits |
Interface 2 | |
Interface type | Chip card slot |
Input | |
Number/Type | 4 EDM/Start inputs: EDM: Inputs for the external device monitoring circuits Start: start inputs: Static switching current 4mA at 24V, dynamic 30mA at 24V (T=100?s) |
Output | |
Safety output | Output circuits 1 and 2: 2 potential-free contacts, max. contact load: 3 ADC-13 at 30VDC, 3AAC-15 at 30VAC Output circuits 3 and 4: 2 PNP transistor outputs max. contact load: 0.5 ADC-13 at 30 VDC |
Connection | |
AS-Interface | spring terminals, removable |
Directive conformity | |
Electromagnetic compatibility | |
Standard conformity | |
Electromagnetic compatibility | EN61000-6-2:2005, EN61000-6-4:2007 |
Degree of protection | EN60529:2000 |
AS-Interface | EN62026-2:2013 |
Standards | EN61000-6-2:2005, EN61000-6-4:2007 EN954-1:1996 (up to Kategorie 4), IEC61508:2001 and EN62061:2005 (up to SIL3) EN13849:2008 (PLe) |
<img class="noprint nodialog" src="https://www.ifm.com/img/co</strong> |